Good Year to All, I am not an expert on plastics and its many varieties. but just a modest gardener. However, I have been battling with this problem for a long time and the solution that I adopt seems to work. First I use a 2/3B pencil. I have found that most labels have shinny side and the other that is slightly less smooth, I use the latter.This has three advantages. It is easy to read, does not bleach in the sunlight and once the label has fulfilled its use I can erase the writing. I find using an ink eraser under a bit of water works fine and I have a label that can be used again and again.I push the label compleatly, deep into the soil. This too has two advantages: first it is protected from the sun and also, maybe more important, is that birds can not pick them out of the pots and leave them lying around and you get into a real quandary as to which is what. I know!When I want to know what the plant is I just pull it out wipe off the soil and then, put it back. this usually happens when looking for variety and cultivar names. I recognise most plants without having to look at the label.Hope this is helpful.Regards Colin
On Monday, 9 January 2023, 15:44:41 CET, Robert Lauf via pbs <pbs@lists.pacificbulbsociety.net> wrote:
If they mean PVC, burning it will yield the acrid smell of hydrochloric acid. Note that in general, burning plastics give off any number of noxious compounds, e.g., cyanide in nitrogen-containing polymers. A great reason not be inside a burning car or aircraft.
The main issue with plastic labels is they inevitably deteriorate in sunlight. The UV rays slowly create more points where the long molecules become cross-linked so it gradually becomes stiffer and more brittle. Unless you want to rub your labels with sunscreen every day, you have to live with this tragic reality. One thing to try is write the name on both ends of the label, so if the top breaks off, you can pull up the label and read the bottom. Also, unless this is a show garden, if the labels are mainly for your own use you can push them down so only 1/2" is sticking out of the dirt, then just pull up when you want to refresh your memory.
Getting back to your specific question, with the caveat that I'm a materials scientist and not a polymer chemist per se, my gut feeling is that pure white labels are more likely to be "virgin" as opposed to recycled plastic for a number of reasons, including the difficulty of avoiding bits of colored material in the recycle stream. At the same time, I would be surprised if recycled material would be any more or less resistant to UV damage. If there's a real polymer person in our midst I will of course defer to their insights on this problem, which has plagued gardeners since I was in grad school 50 years ago!
Bob a gloomy Zone 7 but at least it's not 4 degrees as it was at Christmas
On Monday, January 9, 2023 at 09:18:08 AM EST, Shoal Creek Succulents via pbs <pbs@lists.pacificbulbsociety.net> wrote:
Happy New Year All-
Time and again the subject of labels has been discussed. Most recently,
the longevity of vinyl labels caught my attention.
There appears to be people with a chemical background on this list.
Is there a test to confirm vinyl? I found a website that says burning
various plastics will show which material by crumble, smell, flame color,
etc.
The labels I am purchasing are supposed to be .020” virgin vinyl.
Is there a simple test to verify I am receiving material as purchased?
Thanks much!
Best regards, Lisa
_______________________________________________
pbs mailing list
pbs@lists.pacificbulbsociety.net
http://lists.pacificbulbsociety.net/cgi-bin/…
Unsubscribe: <mailto:pbs-unsubscribe@lists.pacificbulbsociety.net>
PBS Forum https://…
_______________________________________________
pbs mailing list
pbs@lists.pacificbulbsociety.net
http://lists.pacificbulbsociety.net/cgi-bin/…
Unsubscribe: <mailto:pbs-unsubscribe@lists.pacificbulbsociety.net>
PBS Forum https://…
_______________________________________________
pbs mailing list
pbs@lists.pacificbulbsociety.net
http://lists.pacificbulbsociety.net/cgi-bin/…
Unsubscribe: <mailto:pbs-unsubscribe@lists.pacificbulbsociety.net>
PBS Forum https://…